Edit a term base

memoQ lists the terms in the term base in two languages. To choose the languages, use the Language 1 and Language 2 drop-down boxes. For example, if you change the target language from Latin to German, memoQ will display the German translations of the same terms instead of the Latin ones in the list. The drop-down lists offer the languages in the term base.

You can't add new languages to the term base in the term base editor.

In the list, each row represents a term base entry. Normally, memoQ lists all entries.

• To select a term base entry: Click the row in the list.
• To move in the list: Use the arrow keys (up and down). Or, press PageDown or PageUp to move faster. You can also scroll the list.
• To select several entries: Click the first entry. Scroll to the last entry (don't press a key!). Press and hold down Shift, and click the last entry.

  Or: Click the first entry. Press and hold down Shift. Press the down arrow key until you reach the last entry.

  Using the numeric keypad? You need to switch off NumLock for shortcuts with the Page Up, Page Down, Home, End, Up, or Down key.

Normally, memoQ lists all the entries from a term base. You can filter the list, so that it includes some terms only, or terms that were modified after a date, or by someone in particular. You have many options to filter the list.

1. In the Term base editor ribbon, click Filter.
2. The Filtering and sorting window appears. Set the conditions for the filter. Click Accept.

   memoQ displays a list of entries that meet the conditions. No other entries will appear.

For example, let's filter for entries where the English term contains the word 'Performance': In the Filtering and sorting window, choose English for the language. Type the word 'Performance', and click Add. Click Accept.

To forget the filter, and return to the full list:

1. On the Term base editor ribbon, click Filter again.
2. In the Filtering and sorting window, click No filtering/sorting.

The term base editor returns to the full list.

To edit a term in the list:

1. Click the cell you want to edit.
2. Press F2.
3. Edit the term, and press Tab or Enter. Enter takes you to the next entry.

To add a new term to the list:

1. On the Term base editor ribbon, click New.
2. A new, empty entry appears at the bottom of the list. It has an identifier of -1.
3. Click the first language cell of the entry.

4. Press F2. Type the term in the first language (the language selected in the Language 1 drop-down box.) Press Tab.

   memoQ actually creates the entry at this point. A real identifier appears on the left.

5. Press F2. Type the term in the second language (the language selected in the Language 2 drop-down box.) Press Enter.

To delete an entry or several entries:

1. Click the entry. Or, select a block of entries: Click the first entry. Press and hold down Shift, and click the last entry.
2. In the Term base editor ribbon, click Delete.
3. memoQ asks if you really want to delete the entry. Click Yes.

memoQ replaces the entry with an empty row that has an identifier of -2 and says '<entry deleted>'.

In a term base, each entry represents an object or a concept.

• Each entry has language sections - as many as the languages in the term base.
• In each language section, there are terms - one or more.
• In addition, there may be a definition for the entry.
• For each term, there are settings as fields - matching settings for lookups, grammar information, samples etc.
• For the entry, there may be a note and a picture.

  To edit every field in a term base entry:

1. In the list, click the entry.

2. At the bottom of the term base editor, change the fields as necessary.

   

Edit the list of terms: Add, edit, remove terms

On the left, the list of term variants shows all source-language and target-language term variants in the selected entry.

You can't edit other languages than the ones chosen in the Language 1 and the Language 2 drop-down boxes.

• To add a new term variant : Type a term in the box at the top on the source or the target side. Click this button to add the term as a new variant.
• To change the letter case, click the Toggle Case  icon next to the term. The term cycles through lower case, UPPER CASE, Title Case, Sentence case, and the original. Some variants may be missing (for example, in single-word terms, title case and sentence case do not make sense). The term changes on the list, too.

• To change the letter case for two or more terms: Select them in the list. Under the list, next to the term, click the Toggle case  icon. Make sure you do this in the language for which you want the change. A confirmation window pops up.

  

  Choose a letter case, and click OK. You cannot undo this action.

• To edit a term variant: : Click a term variant on the source or the target side. Edit the term in the box at the top. Click this button to save the changes.
• To delete a term variant : Click a term variant on the source or the target side. Click this button to delete the selected term variant.

Set up matching: make memoQ find the term even if it is a bit different in the text

When you're working on a translation, memoQ watches the text for terms. When a term is found, it appears in the Translation results pane, along with its translation.

If the entire term occurs in the source segment in the exact same form as in the term base, memoQ will always find it. But when the term in the text is slightly different, memoQ must use tricks to find it nevertheless.

To set up matching:

1. Click a term variant.
2. On the Matching tab below the list, choose a matching method from the Matching drop-down box.
3. From the Case sensitivity drop-down box, choose what happens if the lowercase and uppercase letters are different in the text.

   You can choose from these matching methods:

• Fuzzy: Use this to get hits independently of prefix or suffix matching. In German, for example, you have "Mutter" in your term base. With the Fuzzy setting, it also finds "Mütter". German also has a lot of compound words like "Festplattenspeicherplatz". When your term base contains "Festplatte" and "speicher", it will be highlighted in the source cell containing the word "Festplattenspeicherplatz".
• 50% prefix: Normally, memoQ finds a word in the text if it begins with this term variant, and more than half of it matches the term variant. For example, if the term variant is 'project', memoQ finds both 'project' and 'projects', but it will not find 'projectapplication'.
• Exact: memoQ finds the term variant only if it occurs in the text in the exact same form. Use this value to set the prefix matching sensitivity of the selected term base entry to insensitive. If the term variant is 'project', memoQ finds project, but it won't find 'projects'.
• Custom: Use this to allow wildcards in the term variants. Use the pipe (|) to mark the end of the stem of a word, or use the asterisk (*) to allow anything to come after the last character. If your term is 'Wassert|urm', memoQ finds 'Wasserturm' and 'Wassertürme' but it will not find 'Wasserschutz'. You can enter several words with pipes and asterisks. For example 'bankovn|í operac|e' matches 'bankovních operací' and 'bankovními operacemi' as well. If you enter at least one pipe or asterisk in a term variant, the Matching setting will automatically switch to Custom.

  Regardless of the settings, memoQ will not find any hits where the selected term base entry is not at the beginning of the expression, that is, it isn't a prefix of the expression in the text.

To choose what happens if the lowercase and the uppercase letters are different in the term variant and the text: Choose from the Case sensitivity drop-down box. You have the following choices:

• Yes: This makes the term variant case-sensitive. The text must contain the term in the exact same form as far as lowercase and uppercase are concerned. For example, if the term is the name 'Will', it is worth setting its case sensitivity to 'Yes' to avoid false positives for 'will'.
• Permissive: This makes the term variant case-sensitive for capital letters and insensitive for lowercase letters. Normally, memoQ works with this. For example, if the term is 'memoQ', and the case-sensitivity is permissive, memoQ will match 'memoQ' and 'MEMOQ' but not 'memoq'.
• No: This makes the term variant case-insensitive. memoQ will find the term in the text, regardless of the lowercase and uppercase letters.

Forbid a term variant, or give a usage example

To do this, click a term variant on the source or the target side, and click the Usage tab below the list.

You can prevent the use of a term in the translation. If a source term is forbidden, it doesn't appear on the Translation results pane. If a target term is forbidden, it appears on the Translation results pane in black. If the you use a forbidden term in the translation, you will get a QA warning.

To forbid a term variant: Check the Forbidden term check box.

To give a usage example for a term variant: Type it in the Example box.

Forbidden terms are indicated in the term base editor:

Enter grammar information for a term variant

To do this, click a term variant on the source or the target side, and click the Grammar tab below the list.

You can choose a part of speech, a gender mark, and a grammatical number, all for the selected term variant:

From the Part of speech drop-down box, you can choose one of the following: ------ (unspecified or unknown part of speech), Noun, Adjective, Adverb, Verb, Other.

From the Gender drop-down box, you can choose one of the following: ------ (unspecified, unknown, or unmarked gender), Masculine, Feminine, Neuter.

From the Number drop-down box, you can choose one of the following: ------ (unspecified or unknown number), Singular, Plural. You can't choose dual or paucal for the time being.

Write a definition for a language

To do this, click the Grammar tab on the source or the target side, depending on which language you want to write the definition for.

Simply type or paste your definition in the Definition box. It's plain text, you can't use formatting or links.

For the entire entry: Write a note and set meta-information

To do this, use the Entry-level data tab to the right of the term lists, still at the bottom of the term base editor:

These details belong to the entire entry, not to a language or a term. You can fill in the following:

• ID: This is the unique identifier of the entry in the term base. You cannot edit this field.
• Note: Write a note here.
• Project: The larger translation project where the entry was created. You can edit this field.
• Domain: This is the domain of the term base entry. You can edit this field.
• Created by: This is the user name of the person who created the entry.
• Modified by: This is the user name of the person who created or last modified the entry. If the entry was modified, the Created by field shows a different name.
• Client: This is the client the term base entry was created for. You can edit this field.
• Subject: This is the subject of the term base. You can edit this field.
• Created at: This is the date and time when the entry was created.
• Modified at: This is the date and time when the entry was created or last modified. If the entry was modified, the Created by field shows a different date and time.

  The creation and modification dates, identifiers and author names are updated automatically, but the Subject, Domain and Note can be changed.

Set up an image for the entire entry

To do this, use the Image tab to the right of the term lists, still at the bottom of the term base editor:

You can add an image to the selected term base entry, or remove it.

• To add a new image: Click Import new image. Then find and choose the image file. memoQ can import .jpg, .png, .gif, and .bmp images.
• To remove the image: Click Delete image.
• To view the image in full size: Click Show full-size image. From online term bases, it may take longer to download the image. When you're working on a translation, this may make you wait a bit if you click a term in the Translation results pane to look at the entry.

You can clean your term base from duplicate entries. It's easy to generate duplicates in a term base. You may end up with a lot of them if you do one of these:

1. Import entries from a file;
2. Add terms to the term base from the translation editor using the Quick add term command (Ctrl+Q).

To start cleaning the duplicates: On the Term Base Editor ribbon, click Show Duplicates. The Filter for duplicates window appears.

Choose what counts as a duplicate; if lower- or uppercase, punctuation and spaces make a difference; and what should happen to duplicates when they are found.

To learn more: See the topic about the Filter for duplicates window.

After you set up all this, click OK. The term base editor displays the duplicates. This list is slightly different from the plain list of term base entries.

To merge each group into a single entry (for example, 100 groups into 100 entries): Click the Merge Selection button.

To treat groups differently: First, use the buttons in the Term base editor ribbon's Duplicates section to mark each group for an action (make master, merge, delete, or skip):

• Mark As Master (Ctrl+Space): The selected entry becomes master within its group - instead of the one that memoQ picked at first.
• Mark For Merge (Ctrl+Alt+Space): Contents of the entry will be copied into the master entry, and then the entry will be deleted.
• Mark For Deletion (Ctrl+D): memoQ will delete the entry. Its contents will be lost without adding them to the master entry first.
• Mark To SkipCtrl+Shift+Space):

After marking entries for an action, run all the actions that were marked. You have two choices:

• Merge Current (Ctrl+Enter): Run the actions for the selected duplicate group.
• Merge Selection (Ctrl+Shift+Enter): Run the actions for all the duplicate groups.

When you merge only one group, a preview window opens. Check the merged entry and edit it if needed.

When you finish, click the Remember these settings for the next merge check box at the bottom of this window. memoQ will remember these settings.

Click OK to confirm the merge and close this window. The merged entries are replaced with the master entry. The new merged entry and any skipped entries remain.

To return to the normal term base editor: On the Term base editor ribbon, click Back To Normal Edit Mode.

Languages are merged, too: If an entry is merged into a master entry that doesn't have all the languages as the merged entry, the new merged entry will have all the languages in the group.

Each entry may be marked for a different merge action. You know the action from the background color in the list:

• master: light pastel green
• marked for merge: light peach
• marked for deletion: light gray
• marked to skip: normal white

If you are editing a moderated online term base, some entries may be marked by a red bullet in the leftmost column.

To see these together, filter for them:

1. On the Term base editor ribbon, click Filter.
2. The Filtering and sorting window appears. Check the Needs moderation check box.
3. Click Accept.

   memoQ gives you a list of all entries that need approval, and nothing else.

You can approve or delete the entry. Or you can correct the terms, and then approve this entry. To approve the entry: On the Term base editor ribbon, click Approve current entry.

To import new entries into the term base from a CSV or an Excel file: On the Term base editor ribbon, click Import. Find and choose the file to import. Then the Term base CSV import settings, or the Term base Excel import settings, or the Term base TMX import settings window appears.

To learn more about the settings: See the documentation about each of these windows (click the name of the window above).

Caution, you may get duplicates: After an import, it's recommended to run Show Duplicates to find and remove the duplicates.

To export entries to a file: On the Term base editor ribbon, click Export.

You can export the term base to a CSV or a SDL Trados MultiTerm XML file.

The Term base export settings window appears. To learn more, see the documentation for that window.

To export just some of the entries:

1. On the Term base editor ribbon, click Filter. The Filtering and sorting window appears.
2. Set up the conditions for the entries you want to see, and click OK.
3. On the Term base editor ribbon, click Export. memoQ warns you that only the filtered entries will be exported, not the entire term base.
4. Click No. The Term base export settings window appears.
5. Choose the settings you need, and click Export.