Pre-translate and statistics

Use the Scope and lookup tab for this.

A scope tells memoQ which documents or parts to look at. You have the following options - choose one radio button:

• Project: memoQ pre-translates all segments in all documents of the current project. If the project has more target languages, it will be pre-translated for every target language.
• Active document: memoQ pre-translates all segments in the active document. The active document is the one you are looking at in the translation editor. You can choose this only if you are working on a document in the translation editor.
• Selected documents: memoQ pre-translates all segments in the selected documents. You can choose this only if you select several documents in Translations under Project home. It doesn't work when the translation editor is in the front.
• From cursor: memoQ pre-translates segments below the current position in the active document. The active document is the one you are looking at in the translation editor. You can choose this only if you are working on a document in the translation editor.
• Open documents: memoQ pre-translates all segments in every document that is open in a translation editor tab.
• Selection: memoQ pre-translates the selected segments in the active document. The active document is the one you are looking at in the translation editor. You can choose this only if you are working on a document in the translation editor.
• Work on views check box: Check this to make memoQ go through segments in the views in the current project. You can choose this only if there is at least one view in the project.

  To pre-translate for just one target language: Before opening the Pre-translate window, choose a language on the Translations pane. Then select all documents, and open Pre-translate.

Use the Scope and lookup tab for this.

You may tell memoQ not to insert a match if the match rate is not good enough. Choose one of these radio buttons:

• Exact TM or corpus match with context: Pre-translate a segment only if there is a context (101%) or a double-context (102%) match.
• Exact TM or corpus match: Pre-translate a segment only if there is an exact (100%) match or a context match.
• Good TM or corpus match: Pre-translate a segment only if there is a match above the "good match threshold". This is defined in the TM settings. To check this setting: In Project home, click Settings. Click the TM settings  icon, and edit the TM settings profile that is active in the project.
• Any TM or corpus match: Always pre-translate a segment if there is a match, no matter the match rate. In fact, it must still be above minimum match threshold (60% by default). To use this, you must turn off TM-driven segmentation (see below).

There are more options to fine-tune the process:

• Only unambiguous matches: If you check this check box, memoQ will pre-translate a segment only if there is exactly one exact (100%), context (101%), or double-context (102%) match. If there are two or more, the segment will not be pre-translated. You must choose Exact TM or corpus match with context or Exact TM or corpus match from the radio buttons.

• Perform fragment assembly: If there is no match from the translation memories or from the LiveDocs corpora, memoQ can insert a fragment-assembled match. To make it work, check this check box. To fine-tune the details, click the Fragment assembly settings link. The Fragment assembly settings window opens. You can choose what counts as a fragment, and how memoQ should put together a fragment-assembled match from them.

  Fragment assembly does not work if TM-driven segmentation or machine translation is turned on.

• Use machine translation if there's no TM match: If there is no match from the translation memories or from the LiveDocs corpora, memoQ can insert a machine translation of the source segment. To do that, it will use the machine translation services set up in the project's MT settings resource. To make it work, check this check box. To set up the MT settings resource, use the Resource Console's MT settings page in the memoQ desktop app. Then add the resource to the project on the Settings page in Project home (local projects and checked-out copies of online projects) or memoQ online project.

  Machine translation does not work if TM-driven segmentation or fragment assembly is turned on.

• Use TM-driven segmentation: memoQ can automatically join or split segments if there are better matches that way. If you are pre-translating for good (or better) matches only, memoQ can try to join or split segments to see if there is an exact match that way. To do this, check the Automatically join and split segments for best match check box. Then, if there is no exact match for a segment, memoQ will check if the segment plus the next ones offer a good or an exact match. If joining does not work, but there is an exact match for the first part of the segment, memoQ will split the segment after this exact match, and it will continue to examine the second part of the split segment for automatic joining and splitting. To fine-tune the details, click the Settings link next to this check box. The TM-driven segmentation settings window opens.

  TM-driven segmentation does not work if you have machine translation or fragment assembly turned on.

You can tell memoQ which TMs, corpora, and MT services you need to use for each language.

TMs and corpora: Click the Select TMs and LiveDocs corpora link. The Select TMs and LiveDocs corpora for pre-translation window opens:

memoQ uses the TMs and corpora which have their check boxes checked. Check or clear the check boxes for each TM or corpus as needed. To select or deselect all the TMs or corpora, click the Select all or Deselect all links.

To save your changes and return to the Pre-translate and statistics window: Click the OK button.

To return to the Pre-translate and statistics window without saving: Click the Cancel button.

MT services: Click the Select MT plugins link. The Select MT plugins for pre-translation window opens:

If the check box for a language is cleared, memoQ does not do machine translation for that language. If a check box is checked, its dropdown shows the MT services set up in the project's MT settings resource. Choose one, and memoQ will use that MT service for pre-translation to that language.

To save your changes and return to the Pre-translate and statistics window: Click the OK button.

To return to the Pre-translate and statistics window without saving: Click the Cancel button.

When setting up pre-translation in a template, the window looks a little different:

When you set up a template, you do not know exactly which TMs, LiveDocs corpora or MT services will be used on projects created from it. But you can tell memoQ if it should use the Working TM, Master TM, Reference TMs, and LiveDocs corpora for pre-translation, or not. You can also tell memoQ to use machine translation or not. Check or clear these check boxes as needed.

To do this, click the Confirm/lock tab.

memoQ can automatically confirm or lock segments that were pre-translated. Only confirmed or proofread segments count in progress information. A document is 100% complete only if all segments are confirmed or proofread. If you do not want others to change the translation, you can also lock these rows.

First, tell memoQ which segments should be confirmed or locked. Use the radio buttons under Rows to confirm/lock based on match rate:

• Do not confirm or lock segments: Does not confirm pre-translated segments. They remain in the pre-translated status.
• Exact match with double context: Confirms and/or locks double-context (102%) matches.
• Exact match with context: Confirms and/or locks context (101%) or better matches.
• Exact match: Confirms and/or locks exact (100%) or better matches. Be careful with this setting. Without the context, pre-translation may insert inadequate translations.
• Only if match is unambiguous: If this is checked, memoQ will not confirm or lock a segment if there are two or more exact or better matches for it.

Second, tell memoQ what should happen to a segment that has the kind of match you are looking for. Use the Use the radio buttons under Status change:

• New status: Pre-translated : Does not change the status of the segments.
• New status: Translator confirmed : Confirms the segments as Translator confirmed.
• New status: Reviewer 1 confirmed : Confirms the segments as Reviewer 1 confirmed.
• New status: Reviewer 2 confirmed : Confirms the segments as Reviewer 2 confirmed.
• Make rows locked: If you check this check box, memoQ will also lock the segments it confirms.

To do this, click the Versioning tab.

memoQ can take snapshots of a document before and after pre-translation. This way you can check the changes, or return to the previous version if anything goes wrong.

Normally, memoQ does not take snapshots of the documents, neither before nor after pre-translation.

• Create minor version snapshot before pre-translation: Check this check box to create a new minor version before pre-translation. It is recommended to add a Note, too.
• Create minor version snapshot after pre-translation: Check this check box to create a new minor version after pre-translation. It is recommended to add a Note, too.

To do this, use the Statistics tab.

memoQ can combine pre-translation and statistics in one go. To make it work, check the Perform statisticscheck box. The analysis report will appear in Project home, on the Overview page (in local projects and checked-out copies of online projects), or in memoQ online project, on the Reports page (in online projects on a memoQ server).

For a detailed description, see the documentation about creating an analysis report. Or, about the Statistics window.

If some target segments already have text, pre-translation overwrites them in some cases, and leaves them as they are in other cases:

• Empty (Not started) segments are always filled in if there is a match.
• Previously pre-translated segments are overwritten if memoQ has a better match than the one that was used earlier.
• memoQ will not change edited or confirmed segments. If you need to overwrite these segments, you need to clear them first using the Clear translations command.