SDLXLIFF (SDL Trados Studio XLIFF) files

Use the General tab for this.

In the Languages section, choose how strictly memoQ should match the documents' languages with the languages of the memoQ project. Normally, memoQ is not very strict. If the main language in the SDLXLIFF document is the same as the main language in the memoQ project, memoQ imports the text. The sublanguages can be different. But there are two other settings, too:

• Import only content where languages match project languages exactly: Click this radio button to restric the import to sections where the language pair is exactly the same as the project languages. Sections with a different sublanguage will not be imported.
• Import content where the main languages match project languages: Normally, memoQ does this. It imports sections where the main languages in the language pair are the same as the main languages of the memoQ project. If there is a difference in the sublanguages (dialects), memoQ still imports the text.
• Import all content regardless of language: Choose this radio button to import every section from the SDLXLIFF file, regardless of the languages.

  In the SDLXLIFF document, the target language may be missing. If this is the case, you can export the translated SDLXLIFF file where the target language is the same as the target language of the memoQ project. To do this, check the Use project target language in export if it is not specified in the original check box.

  To import context into memoQ: In an SDLXLIFF document, each segment (called translation unit) has a numeric identifier, called the trans-unit ID. Under Context section, check the Import trans-unit ID as context ID check box. If you don't do that, memoQ won't be able to return context matches from the translation memories when you translate SDLXLIFF documents.

The segment statuses in SDL Trados Studio are a bit different from the statuses in memoQ.

When memoQ finds a segment status in the SDLXLIFF document, it needs to know what status to use in the memoQ segment.

Use the States tab to set this up.

This step is called mapping.

Normally, memoQ interprets the SDLXLIFF segment statuses, and the status of segments in memoQ will be correct.

Don't change the mapping unless absolutely necessary: You can change the mapping. But don't do that unless you need different segment statuses in memoQ.

To change how segment statuses are imported

In the Import section, check the Map XLIFF statuses to memoQ statuses check box. In the list below, you see the default states mapping. Click Add new "conf" value to add a new state:

Enter a conf attribute in the text field next to Value in SDLXLIFF "conf" attribute. Choose a state in the drop-down list for Default memoQ segment status. You can choose: Not started. Translator confirmed, Reviewer 1 confirmed, Reviewer 2 confirmed, Assembled from fragments, Partially edited, Pre-translated, Rejected, or Machine Translated.

After you created a new conf value, you can add a new origin value to it or modify it. Click the Add new "origin" value / modify selected command link:

Enter a value in the text field next to Value in SDLXLIFF "origin" attribute. Choose a state in the drop-down list for memoQ segment status. You can choose: Not started, Translator confirmed, Reviewer 1 confirmed, Reviewer 2 confirmed, Assembled from fragments, Partially edited, Pre-translated, Rejected or Machine Translated.

Click the Remove command link to remove a state and its mapping.

When you export the SDLXLIFF file - or when you generate the SDL return package, memoQ does the following:

• it keeps the state, origin and match rate in the exported file,
• it keeps the current status and match rate in the memoQ document,
• it identifies the differences in the original target and the current target segment.

  memoQ knows how to export the segment statuses for SDL Trados Studio: Don't change these settings unless absolutely necessary.

To export segment statuses, or to change how they are exported in the SDLXLIFF document:

1. Click the States tab.
2. Under Export, check the Map memoQ statuses to XLIFF statuses check box.
3. In the list at the bottom of the dialog, you can see the default mapping.

   If the Export original statuses for unchanged translations check box is checked, memoQ exports the exact same metadata for those segments that were not changed in memoQ. Don't clear this check box if you need to return your work to your client who uses SDL Trados Studio.

Some status information in SDLXLIFF doesn't exist in the memoQ segment statuses. This information can be imported in the form of comments.

To set this up, click the Additional comments tab. You can choose which statuses are imported, and what the comment should be.

Normally, memoQ imports all information, and uses the following comments:

• For translations rejected by a reviewer: memoQ will append this to the comment field in memoQ.
• For translations approved by a reviewer: memoQ will append this to the comment field in memoQ.
• For translations with "Rejected Sign-off" status: memoQ will append this to the comment field in memoQ.
• For translations with "Approved Sign-off" status: memoQ will append this to the comment field in memoQ.

  The appended text will be displayed in triple hash marks, e.g. ###Rejected by reviewer###.

  These comments aren't exported: When you export the file, the appended text in the comment will be skipped.

You can split and join segments in SDLXLIFF files.

Comments are imported and exported: memoQ always imports SDLXLIFF comments if there are any in the SDLXLIFF file. memoQ always exports SDLXLIFF comments.

memoQ adds user and timestamp to exported comments: When SDLXLIFF comments are converted to memoQ comments, the user and timestamp information will be converted to memoQ user and timestamp information, and vice versa.

When you import an SDLXLIFF document, the "g" tags from the SDLXLIFF files appear as special tags. The tag information gets in the memoQ tag catalog, and you will also see if a tag is open, close, or empty.

If the original file that was imported into SDL Studio was a DOC or DOCX file: Bold, italic, underline, subscript, and superscript formatting is displayed correctly memoQ. You can change them freely. This also works if the original document was in any other MS Office format (XLS, XLSX, PPT, PPTX, RTF).

An SDLXLIFF file from SDL Trados Studio needs to be imported into memoQ, and exported back to SDLXLIFF, without losing anything. memoQ uses a hard-coded mapping between SDLXLIFF and memoQ comments:

• A file-level SDLXLIFF comment will always become a document-level memoQ comment.
• A segment-level SDLXLIFF comment will always become a target-level memoQ comment.
• A selection-level SDLXLIFF comment will always become a selection-level memoQ comment.
• An Error type SDLXLIFF comment will always become an Error type memoQ comment.
• A Warning type SDLXLIFF comment will always become a Warning type memoQ comment.
• A FYI type SDLXLIFF comment will always become an Information type memoQ comment.

In memoQ, there are more comment types than in SDL Trados Studio. memoQ uses hard-coded settings to export these, too:

• A document-level memoQ comment is exported as a file-level SDLXLIFF comment.
• Row-level, source-level or target-level memoQ comments (any of the three) is exported as a segment-level SDLXLIFF comment.
• A selection-level memoQ comment is exported as a selection-level SDLXLIFF comment.
• An Error type memoQ comment is exported as an Error type SDLXLIFF comment.
• A Warning type memoQ comment is exported as a Warning type SDLXLIFF comment.
• An Information type memoQ comment is exported as a FYI type SDLXLIFF comment.
• Other type memoQ comments are not exported.

If an SDLXLIFF document contains tracked changes, memoQ can import them as tracked changes. SDLXLIFF documents are similar to memoQ XLIFF documents, and they usually contain the tracked changes in the target segments.

To choose how memoQ treats this, click the Tracked changes tab.

First, tell memoQ how it should import tracked changes. Most of the time, this means tracked changes in the target text.

• Normally, memoQ will import the final version only - as if all changes were accepted. This is the Accept all changes before import radio button.
• To import the unedited version - as if all changes were rejected: Click Reject all changes before import.
• To import the tracking markup - to see how the document was edited: Click Import change tracking information. In the translation editor, the document will look like this:

  

Then, tell memoQ how it should export tracked changes. memoQ will export tracked changes from the target text. This is completely independent from tracked changes in the source text. If you want to send tracked changes back to Trados Studio as tracked changes - and not as Translation Quality Assessment (TQA) feedback -, check the The exported file contains Tracked changes instead of TQA information check box. Then choose one of these options:

• Normally, memoQ uses the options that you set in the Miscellaneous pane of the Options window. In the Miscellaneous pane, click the Import/export tab. This is the Use the global options radio button.
• To export the final version - with all changes accepted: Click Export final version.
• To export the tracking markup - to see what was changed: Click Export change tracking markup.

Similarly to Linguistic Quality Assurance (LQA) in memoQ, Trados Studio can add structured feedback to translations. In Trados Studio, this is called Translation Quality Assessment (TQA).

This works when you import a Trados Studio (SDLPPX) package: memoQ can import TQA information from SDLPPX packages, but not from individual SDLXLIFF files. This section is here in the Help because you need it to set up SDLXLIFF import when you are importing a Trados Studio package.

To control that, click the Translation quality assessment tab:

Basically, memoQ can convert TQA information into its own LQA warnings. And, when it exports the SDLXLIFF document, it can export LQA warnings in the form of TQA feedback.

First, tell memoQ how it should import TQA feedback.

• Normally, memoQ will import the documents as if all feedback were accepted. (In Studio, you can accept or reject TQA feedback.) This is the Accept all quality-assessed changes before import radio button.
• To import the documents as if all feedback were rejected: Click Reject all quality-assessed changes before import.
• To import the feedback in the form of LQA warnings (and score ranges): Click Import quality assessment information as LQA ranges.

  When you work on this document (more precisely, on this package), you may add Linguistic Quality Assurance (LQA) warnings to the documents. You need to tell memoQ how it should export these warnings. This can be completely independent from the quality-assessed feedback that was originally imported with the package. If you want to send LQA warnings back to Trados Studio in the form of TQA feedback, check the Export memoQ LQA information as Trados quality assessment changes check box. Then choose one of these options:

• Normally, memoQ uses the options that you set in the Miscellaneous pane of the Options window. In the Miscellaneous pane, click the Import/export tab. This is the Use the global options radio button.
• To export the final version - without the LQA information: Click Export final version.
• To export the TQA information - to see the feedback: Click Export change tracking markup. (The text in the window needs to be corrected.)